Central Machinery 67690 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Central Machinery Manuals
  4. Lathe
  5. 67690
  6. Set up and operating instructions manual

Central Machinery 67690 Set Up And Operating Instructions Manual

14” x 40” wood lathe with 7” sander
Hide thumbs
Table of Contents

Advertisement

Quick Links

14" X 40" WOOD LATHE
WITH 7" SANDER
SET UP AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
©
Copyright
2010 by Harbor Freight Tools
artwork contained herein may be reproduced in any shape or form without the express written
consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due
to continuing improvements, actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
67690
®
. All rights reserved. No portion of this manual or any

Advertisement

Table of Contents
loading

Related Manuals for Central Machinery 67690

Summary of Contents for Central Machinery 67690

  • Page 1 14” X 40” WOOD LATHE WITH 7” SANDER Model 67690 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. ©...

  • Page 2: Table Of Contents

    WORK AREA SET UP ................11 DEFINITION OF TERMS ................11 ADJUSTMENTS ..................12 OPERATING INSTRUCTIONS ..............15 MAINTENANCE AND SERVICING ............18 PLEASE READ THE FOLLOWING CAREFULLY........18 TROUBLESHOOTING ................19 PARTS LIST ....................20 ASSEMBLY DIAGRAM ................21 WARRANTY INFORMATION ..............22 SKU 67690 For technical questions, please call 1-800-444-3353. Page 2...

  • Page 3: Important Safety Information

    Never modify the plug in hazardous situation which, if any way. Do not use any adapter not avoided, could result in plugs with grounded power tools. minor or moderate injury. Unmodified plugs and matching SKU 67690 For technical questions, please call 1-800-444-3353. Page 3...
  • Page 4 Power hard hat, or hearing protection used tools are dangerous in the hands of for appropriate conditions will reduce untrained users. personal injuries. SKU 67690 For technical questions, please call 1-800-444-3353. Page 4...
  • Page 5 The wood shavings will be Tighten all locks before operating. sharp. Do not mount a split workpiece. 14. The cutting tool must always be tight within the tool post or chuck and SKU 67690 For technical questions, please call 1-800-444-3353. Page 5...
  • Page 6 • Do not use with power switch locked INSTRUCTIONS. • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Interrupter (GFCI) should also be SKU 67690 For technical questions, please call 1-800-444-3353. Page 6...

  • Page 7: Grounding

    When using more than one extension low resistance path to carry electricity cord to make up the total length, away from the user, reducing the risk make sure each cord contains at SKU 67690 For technical questions, please call 1-800-444-3353. Page 7...

  • Page 8: Symbology

    5.1 – 7.0 7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 * Based on limiting the line TABLE A voltage drop to five volts at 150% of the rated amperes. SKU 67690 For technical questions, please call 1-800-444-3353. Page 8...

  • Page 9: Specifications

    Spanner (70) Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Figure 1 SKU 67690 For technical questions, please call 1-800-444-3353. Page 9...
  • Page 10 Slider (46) into the groove on the Work Table. See Figure 5, below. Work Table (36) Wrench (71) Sanding Screw Disc (55) (34) Miter Gauge Slider Miter (46) Gauge (43) Figure 3 Figure 5 SKU 67690 For technical questions, please call 1-800-444-3353. Page 10...

  • Page 11: Work Area Set Up

    Headstock. between Drive Center (8) and Tail Swing: A dimension representing Center (27). Also a method of largest diameter workpiece a lathe holding a workpiece by mounting it SKU 67690 For technical questions, please call 1-800-444-3353. Page 11...

  • Page 12: Adjustments

    Then use screwdriver BELT (12) (not included) to remove Screws (51) on side of Belt Cover. See Figure 6. Figure 6 Belt Cover (32) MOTOR PULLEY BOLT (47) (12) Screws (51) SKU 67690 For technical questions, please call 1-800-444-3353. Page 12...
  • Page 13 Polishing and Finishing: Typically, polishing and Use Spanner to tighten Lock Screw, finishing can be done at faster speeds than turning. securing Tool Rest Holder in place. SKU 67690 For technical questions, please call 1-800-444-3353. Page 13...
  • Page 14 Screw should not protrude from the Tail Stock more than 2” or the Tail Axis will not be supported enough. Failure to follow these warnings may result in personal injury. SKU 67690 For technical questions, please call 1-800-444-3353. Page 14...

  • Page 15: Operating Instructions

    Hand Wheel, tighten the Tail Nut (26) with a wrench. WARNING! Do not overtighten. With the workpiece still attached, mount the Headstock Drive Center onto the Main Spindle (2). SKU 67690 For technical questions, please call 1-800-444-3353. Page 15...
  • Page 16 Lathe. screws. 24. IMPORTANT: Whenever sanding 17. To mount the workpiece to a backing or finishing, remove the Tool Rest to block, make the backing block from SKU 67690 For technical questions, please call 1-800-444-3353. Page 16...
  • Page 17 Use in a well-ventilated before operation. area and avoid inhaling the fumes. 12. Stop and check when anything feels Reattach the Work Table, following or sounds wrong. step 1 above in reverse order. SKU 67690 For technical questions, please call 1-800-444-3353. Page 17...

  • Page 18: Maintenance And Servicing

    DAILY, lubricate all external moving parts with ISO 68 or SAE 20W oil. Lubricate the Tailstock oiling point every five uses, or once per week if used frequently. SKU 67690 For technical questions, please call 1-800-444-3353. Page 18...

  • Page 19: Troubleshooting

    1. Unplug the lathe from its and/or internal wiring. electrical outlet immediately. Do not operate lathe until it is repaired by a qualified service technician. Follow all safety precautions whenever diagnosing or servicing the Lathe. SKU 67690 For technical questions, please call 1-800-444-3353. Page 19...

  • Page 20: Parts List

    Washer (Ø5) Tail Screw Nut (M12) Tail Nut Set Screw (M8x10) Tail Center Pan Head Screw (M4x6) Ball Bearing (6201z) Spanner Hand Wheel Hex Wrench (not shown) Nut (M18) End Caps SKU 67690 For technical questions, please call 1-800-444-3353. Page 20...

  • Page 21: Assembly Diagram

    SKU 67690 SKU 67690 For technical questions, please call 1-800-444-3353. For technical questions, please call 1-800-444-3353. Page 21 Page 21...

  • Page 22: Warranty Information

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 67690 For technical questions, please call 1-800-444-3353. Page 22...

Table of Contents