Advertisement
Brought To You By Augusta Flint
MINI-HOBBY WOODWORKING LATHE
Model 03173
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
2002 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Advertisement
Table of Contents
Related Manuals for Central Machinery 03173
Summary of Contents for Central Machinery 03173
- Page 1 Brought To You By Augusta Flint MINI-HOBBY WOODWORKING LATHE Model 03173 ASSEMBLY AND OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2002 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
-
Page 2: Product Specifications
DRESS SAFELY. Do not wear loose clothing or jewelry, as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up above elbows. SKU 03173 PAGE 2 REV 01/04... -
Page 3: Specific Product Warnings And Precautions
THE WOODTURNING SUPPORT (part #18). MAINTAIN A SAFE WORKING ENVIRONMENT. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use SKU 03173 PAGE 3... - Page 4 SWITCH FIGURE A IF AN EXTENSION CORD (not included) IS USED, MAKE SURE TO USE ONLY UL APPROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH. (See Figure B.) AWG RATING CHART - 120 VOLT FIGURE B SKU 03173 PAGE 4...
- Page 5 Speed Motor Unit (part #4-A) into the outlet of the 12 Volt Transformer (part #58). (See Figure A.) Then, plug the Power Cord of the 12 Volt Transformer (part #58) into a grounded, 120 volt, electrical outlet. (See Figure A.) SKU 03173 PAGE 5...
- Page 6 (part #6) will be used to illustrate how the two parts, as with other parts, are connected together. (See Figure C.) CONNECTION PIECE (#19) SCREW (#84) NUT (#93) HIGH SPEED MOTOR UNIT (#4-A) DRIVE BELT (#15) “T” SLOT CONNECTION PIECE (#19) SCREWDRIVER (NOT INCLUDED) WHEEL GEAR BOX (#6) FIGURE C SKU 03173 PAGE 6...
- Page 7 Attach the Wood Turning Support (part #18) to the top of the Large Slide (part #9), using one Screw (part #87) and one Slot Nut (part #60). (See Figure E.) Attach a Drive Center (part #31) to the Wheel Gear Box (part #6.) (See Figure E.) SKU 03173 PAGE 7...
- Page 8 PIECE (#19) WOOD TURNING SUPPORT (#18) LARGE SLIDE (#9) SCREW (#87) SLOT NUT (#60) DRIVE CENTER (#31) HIGH SPEED MOTOR TAIL UNIT (#4-A) STOCK (#7) LIVE WHEEL CENTER GEAR (#28) BOX (#6) FIGURE E WOODWORKING LATHE SKU 03173 PAGE 8...
- Page 9 To make a cut in a different location on the woodstock pull the Turning Gouge (part #49) away from the woodstock, and turn the Handle of the Large Slide (part #9) clockwise or counterclock- wise to reposition the Large Slide. (See Figure E.) SKU 03173 PAGE 9...
-
Page 10: Inspection, Maintenance, And Cleaning
12 Volt Transformer Drive Belt Cover Slot Nut Woodturning Support Two Hole Clamping Plate Connection Piece Collet Live Center Bolt (3 x 10) Center Finder Screw (4 x 6) Drive Center Screw (4 x 10) Collet Holder SKU 03173 PAGE 10... -
Page 11: Assembly Diagram
Brought To You By Augusta Flint ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 03173 PAGE 11...