New Holland LS160 Manual page 239

6. Raise the operator's seat and latch in the raised
position, 1.
CAUTION
Never work under a raised seat unless it is
securely latched in the raised position.
7. Remove the step shield, 1, to access the
hydrostatic pump and motor area. For more
access, remove the right or left hydrostatic
control handle assembly, 1 or 2.
8. Relieve all pressure in the hydraulic and
hydrostatic systems.
CAUTION
Never loosen any hydraulic lines without first
relieving all pressure in the systems to avoid
serious injury.
Draining the hydraulic oil reservoir is not required
if the suction and return lines are capped to
prevent loss of oil. Drain the hydraulic oil if the
hydraulic system requires cleaning.
9. Remove the rear engine belly pan hardware, 1,
and remove the belly pan.
CAUTION
Use a floor jack to support the belly pan to
prevent serious injury.
SECTION 29 - HYDROSTATIC TRANSMISSION
29-59
117
118
119