Functional Description - Bosch AVENAR Series Installation Manual

36 en | Functional Description
Notice!
Do not use tools with sharp edges (e.g. screw drivers or pens)
to operate the device or its touchscreen.
Notice!
The device may not be exposed to direct sunlight.
Notice!
Touchscreen recalibration is required to be performed at least
once a year. Otherwise operating the device may be difficult or
even not possible without prior re-calibration. For further
information, see the necessary procedure in the user guide.
2

Functional Description

The panel controller controls every component connected to the
panel and features the following functional elements (see 01,
page 4 ):
Pos. Designation
A Interfaces
B Touchscreen
C 6 fixed
buttons
D Power button
E Memory card
slot
F Network label
G DIP switch
label
2020.05 | 6.0 | F.01U.347.557
Function
CAN1, CAN2, IN1/2, Rail
Operating the networked system through virtual
buttons and variable display windows
Standard entries
Shutdown and restart of the device
Memory card reader for maintenance services
Label assigning the different network connectors
DIP switch label with areas to write down the PNA
(Physical Node Address) and the IP address
AVENAR panel series
Bosch Sicherheitssysteme GmbH