TP-Link TL-MR6400 User Manual page 9

Chapter 1 Get to Know Your 4G LTE Router
Item Description
POWER Port For connecting the router to power socket via the provided power adapter.
For connecting to your PCs or other Ethernet network devices.
LAN1, LAN2, LAN3,
In wireless router mode, the LAN4/WAN port is used for connecting to a Cable/FTTH/
LAN4/WAN
VDSL/ADSL device.
Press and hold this button until the Power LED starts flashing to reset the router to its
factory default settings.
WPS/RESET
To enable the WPS function, press this button about 2 seconds. If you have a WPS-
supported device, you can press this button to quickly establish connection between the
router and the client device.
Wi-Fi ON/OFF For turning on/off the Wi-Fi function.
Micro SIM Card Slot For holding the micro SIM card.
Antennas Used for data sessions over LTE. Upright them for the best mobile internet signal.
5