Local Upgrade; Back Up And Restore Configuration Settings - TP-Link TL-MR6400 User Manual

Chapter 13
3. Focus on the Online Upgrade
4. Wait a few moments for the upgrading and rebooting.

13. 2. 2. Local Upgrade

1. Download the latest firmware file for the router from our website www.tp-link.com.
2. Visit http://tplinkmodem.net, and log in with
router.
3. Go to Advanced > System Tools
4. Focus on the Device Information section. Make sure the downloaded firmware file matches
with the Hardware Version.
5. Focus on the Local Upgrade
file, and click Upgrade.
6. Wait a few moments for the upgrading and rebooting.

13. 3. Back up and Restore Configuration Settings

The configuration settings are stored as a configuration file in the router. You can back
up the configuration file to your computer for future use and restore the router to a
previous settings from the backup file when needed. Moreover, if needed you can erase
the current settings and reset the router to the default factory settings.
• To back up configuration settings:
1. Visit http://tplinkmodem.net, and log in your TP-Link ID or with the password you
set for the router.
2. Click Advanced
3. Click Backup to save a copy of the current settings to your local computer. A conf.
bin file will be stored to your computer.
section, and click Upgrade.
> Firmware
section. Click
> System Tools > Backup & Restore
your TP-Link ID or
the password you set for the
Upgrade.
Browse to locate the downloaded new firmware
page.
Administrate Your Network
78