I/O Module Leds - NETGEAR 8800 Series Hardware Installation Manual

The 8800 Series 24-port 1000Base-X SFP Module module has the following LEDs:
Module status
•
Module diagnostics
•
Port status
•
For information about the LEDs and their activity, see the following section,

I/O Module LEDs

This section describes the LEDs for the module, the port, and inline power delivery status for
I/O modules in the 8800 series of switches.
Inline power delivery applies only to the ports on an 8800 Series
Note:
48-port 10/100/1000 Base-T Module XCM8848T with an installed
PoE card.
Module LEDs
The following table describes the LED activity for all I/O modules that are installed in 8800
series switches.
Table 2. LED Meanings in I/O Modules for 8800 Series Switches
LED Color
PoE Present Amber
Green
Off
This LED is present only on the XCM8848Tmodule.
Status Green blinking
Amber blinking
Off
DIAG Off
Amber blinking
Amber
20 | Chapter 2. 8800 Series Modules
8800 Series Chassis Switch Hardware Installation Guide
Indicates
The optional PoE card is installed on the module but is
malfunctioning.
The optional PoE card is installed on the module and is active.
No optional PoE card is installed.
Normal operation
Configuration error, code version error, diagnostic failure, or
other severe module error
No power
Normal operation
Diagnostics in progress
Diagnostic failure
I/O Module LEDs.