Table of Contents
Advertisement
8800 Series Chassis Switch Hardware Installation Guide
Figure 25. Attaching the support bracket to the rack
Lift the back of the empty 8800 series chassis onto the support bracket.
4.
Slowly guide the chassis into the rack until the mounting brackets are flush against the rack
5.
uprights.
Secure the chassis to the rack using eight rack mounting screws. (Screws are not provided.)
6.
Be sure that the screws are secure. Refer to
locations.
Note: Figure 26
installation, use the same mounting locations shown in the figure, but insert the
screws through the designated slot locations of the mid-mount brackets.
Figure 26. Securing the XCM8806 Chassis to a rack
and
Figure 27
show a standard rack mount. For mid-mount
Figure 26
and
Figure 27
Chapter 5. Install an 8800 Series Chassis
for the screw
| 49
Advertisement
Table of Contents
