Advertisement
l.
Using a digital level, measure and record the
angle of the feed tube, as shown in Figure 6.
m. Type =CALUP,XX.X where xx.x is the
number you recorded in Step l.
n. Type =CALGYRO then press Enter. Wait
two minutes while the azimuth and elevation
gyros calibrate.
o. Type ZAP then press Enter to restart the
system.
p. Reinstall the radome.
Step 4 - Reinstall Satellites
The TracVision M9 system must now be set to
track the satellites of your choice. Follow the
instructions provided in the TracVision M9
User's Guide to set the system to track your
selected satellites.
The procedure is complete!
Figure 6 Measuring the Feed Tube
Feed Tube
5
Advertisement
