Audio Mode; Preset Stations; Recalling A Stored Station - Hitachi AXM525DBE Instruction Manual

Audio Mode

1. Press MONO/STEREO on the remote control to toggle between the Stereo or Mono
selection.
2. Or press and hold MENU/INFO on the unit or press MENU on the remote control and
then press
on the remote control to confirm.
to select <Stereo allowed> or <Forced Mono>. Press /ENTER/PAIR on
3. Press
the unit or ENTER on the remote control to confirm.
The unit will automatically switch between stereo and mono mode, but you can override this and
switch this function manually. This is helpful when receiving poor signal reception.

Preset Stations

You can store up to 30 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold PRESET/MEM on the remote control. The display will show "Save to P#".
2. Press PRESET to select your desired preset station number and then press ENTER to
confirm.
3. The station will be stored and the screen will then show "Preset # Stored".

Recalling a Stored Station

1. Once you have saved a station to one of the preset buttons, you can recall it by pressing
PRESET/MEM on the remote control.
2. Press PRESET
to select your desired preset station number.
3. Press ENTER on the remote control to confirm the selection.
The stored stations will be saved into the memory and power off will not erase it. Storing a new station
into a preset location will erase the previously stored station in that location.
to select <Audio setting>. Press /ENTER/PAIR on the unit or ENTER
GB
23