Eq Control; Software Version; System Reset - Hitachi AXM525DBE Instruction Manual

EQ Control

This system supports a variety of equalizers and sound effects.
During playback, press EQ on the remote control to select a desired music mode. Each time
EQ is pressed, the music mode will change to the next one as follows:
GB

Software Version

1. In DAB or FM mode, press and hold MENU/INFO on the unit or press MENU on the
remote control and then press
PAIR on the unit or press ENTER on the remote control to confirm.
2. The software version will show on the display.
3. Press MENU/INFO on the unit or press MENU on the remote control to exit.

System Reset

There may be times when you need to reset your unit back to the factory settings especially
when you have moved house. If you experience reception problems you may want to reset
and try again. If you move to another part of the country and pick up the local and national
DAB stations in that area, your previously tuned channels may no longer be available.
1. Ensure the unit is switched on.
2. Press the MODE button repeatedly and select DAB mode.
3. Press the
4. With the unit in DAB mode and the CD tray open press and hold the /ENTER/PAIR
button on the unit.
The unit will reset itself. Once it has reset it will automatically start to scan for DAB radio
stations.
After the system reset, all the tuned stations, FM/DAB preset stations will be erased.
18
FLAT ROCK
button to open the CD tray
CLASSIC POP JAZZ
buttons to select <SW version>. Press /ENTER/