Heater Operation Of The External Dryer System; Display The Control Menu Of The External Dryer System - Oki ColorPainter M-64S User Manual

Heater operation of the
external dryer system

Display the control menu of the external dryer system

Press the HEATER button to display the heater control menu.
In the heater control menu, pressing the HEATER button switches the display between the media heater control
menu, the external dryer system control menu and the online state, as shown below.
PRINTER READY
07: RFLTIV/1219mm
2nn
55 40
Aft 40 +40
2nn
ON
Ext READY
H E A T E R
When the heater control menu display ends automatically
HEATER DISPLAY ENDED
If no buttons are input for 30 seconds while the heater control menu is displayed, the message HEATER DISPLAY
ENDED appears automatically for two seconds and then the heater control menu display ends. While this message
is displayed, no button input is effective.
70
Advanced operations
D
H E A T E R
The display changes
to end automatically.
45°C
45Pre
H E A T E R
The display changes
to end automatically.
š If a media preset with the reflective sheet mode
set to on is selected, the temperature settings
of the media heaters cannot be adjusted from
the panel (printing is performed with the
temperatures set in the data).
External dryer system
External dryer system status
control information
2nn ON
Ext READY
External dryer system warming state