To Turn The Control Box On And Off; Power-On Procedure - Oki ColorPainter M-64S User Manual

To turn the control box on and off

The power supply must be 200 V.
POWER SUPPLY POWER
SSR 1 POWER
SSR 2 POWER
CAUTION
‹ Use only the power cords supplied with the control box.
‹ The supplied power cable is for 200 V AC only. Note that the plug shape differs from that for 100 V AC.

Power-on procedure

1
2
18
Before printing
Off
Turn the printer on before turning the control
box on.
page 38 in the IP-6620 Color Inkjet Printer
Refer to
User's Guide.
Check that the three switches POWER SUPPLY
POWER, SSR 1 POWER, and SSR 2 POWER of
the control box are set to the off position.
Turn off any switch set to on.
Connect the two supplied power cords to the
power inlets of the control box and to the
power sockets.
On