Detecto Solace ID-3636S-855RMP Manual page 15

Setup Menu Page 5
MENU
Model: Dialysis
Calibrate Scale
Load Cell Trim
<<<
Model:
This will change the default settings and operation of the indicator. For instance, select
"Icon" as the model in order to use the stand-up type indicator with the sonar height
measurement. For wheelchair type scales with tare functionality, select "Wheelchair" as the
model. For other types of scales, select "Other".
Touch this key to open the model selection screen. Using the numeric keys, enter a new
value and then press the Save key to save it.
Allowable values for model are 0 – 3.
0 = icon
Calibrate Scale
Touching this key will allow for calibration of the scale. Refer to the CALIBRATION section
of this manual for instructions to select the calibration mode and how to perform calibration.
Load Cell Trim
Touching this key will allow for trimming (adjusting the output of) the load cells in the scale.
Refer to the LOAD CELL TRIM section of this manual for instructions on how to trim the
load cells.
 Press the >>> key to advance to Setup Menu Page 6.
 Press the <<< key to return to Setup Menu Page 4.
 Press the Exit key to exit Setup and return to the Weight screen.
14
PAGE 5
Exit >>>
1 = Wheelchair 2 = Other 3 = Dialysis
3300-0298-0M Rev B 05/18