Install Grass Bag Assembly - Ariens Gravely IKON-X Operator's Manual

Install Belt Cover
1. Install one 3/8" x 1 1/2" flat washer
(item 5) on belt cover bolt on blower
assembly. See Figure 20.
Figure 20
2. Position belt cover (item 17) over deck
and idler assembly and secure with two
3/8" x 1 1/2" flat washers (item 5) and two
clamping knobs (item 6). See Figure 21.
6
5
17
Figure 21
INSTALL GRASS BAG
ASSEMBLY
Install Trailer Hitch
1. Install hitch (item 20) onto back of frame
with four 3/8" x 3/4" round head square
neck bolts (item 36) and 3/8" locking top
flange nut (item 32). See Figure 22.
5
20
2. Clean bumper surface and install trailer
hitch decal (item 21) next to hitch. See
Figure 23.
EN - 14
36
32
Figure 22
21
Figure 23