Install Bagger Hose - Ariens Gravely IKON-X Operator's Manual

2. Mount upper end of support strap to hood
assembly using one 3/8" x 1" round head
square neck bolt (item 27) and one 3/8"
locking top flange nut (item 32). Ensure
hardware is installed in correct hole. See
Figure 28.
Ariens
32
Figure 28

INSTALL BAGGER HOSE

Cut Hose
1. Position bagger hose (item 40) and cut to
length if specified in Figure 29.
Hose Length
Deck Size Hose Length
42"
52"
48"
60" Does not need to be cut.
Figure 29
27
Gravely
40
54"
54"
54"
Install Hose
See Figure 30.
1. Install hose fully on blower hose adapter.
2. Open latch on inlet on hood assembly
and install hose on inlet. Close latch,
making sure that latch attaches to one rib
of hose.
Assemble Mesh Bags
See Figure 31.
1. Install two mesh bags (item 34) onto two
bag frames (item 33) by routing the bag
frames in the open end of the mesh bags.
2. Install plastic tube (item 41) on both ends
of each bag frame and push ends
together.
EN - 16
Latch
Figure 30