Table of Contents
Advertisement
Read this Owner's Manual and safety rules before
assembling or operating your grass catcher.
Compare the illustrations with the carton contents to
familiarize yourself with the parts before starting the
assembly. Study the operating instructions and safety
precautions thoroughly to insure proper functioning of
your Grass Catcher and to prevent injury to yourself
and others. Save this manual for future reference.
All references to left, right, front or rear are given from
operator sitting in operation position and facing the
direction of forward travel.
UNPACKING INSTRUCTIONS
Remove all parts and packing materials from carton.
Turn carton upside down on floor of work area. To
protect grass catcher cover during assembly, place
cover upside down on overturned carton.
Check carton contents against list. Be sure all parts are
there.
CARTON CONTENTS
BAGGER
TUBE
LOWER BOOT
ASSEMBLY
These Are the Tools You Will Need to Assemble
Your Grass Catcher:
COVER ASSEMBLY
OWNER'S
MANUAL
UPPER BOOT
6
1/2" Wrench
9/16" Wrenches (2)
5/8" Wrench
1/2" Socket
9/16" Socket
11/16" Socket
Drive Ratchet with 3" or longer Extension
Flat Blade Screwdriver
Drill Bits
WARNING: BEFORE ASSEMBLING
GRASS CATCHER TO TRACTOR:
• Place gearshift/motion control levers in
"NEUTRAL" position.
• Set parking brake.
• Place attachment clutch in
"DISENGAGED" position.
• Turn ignition key "OFF" and remove key.
• Make sure the blade and all moving
parts have completely stopped.
Disconnect spark plug wires from spark plugs
and place wires where they cannot come in
contact with plugs
GRASS BAGGER
BASKETS (2)
BAGGER FRAME
HARDWARE
PACKAGE
COUNTER-
WEIGHT
OEe0520
Advertisement
Table of Contents
