Related Manuals for Ariens 815046
Summary of Contents for Ariens 815046
- Page 1 Edge Bagger Operator’s Manual Manuel du Utilisateur Models 815046 – 42” Edge Bagger (SN 000101 +) 815047 – 52” Edge Bagger (SN 000101 +) ENGLISH • 09171900 3/20 FRANÇAIS Printed in USA...
-
Page 2: Table Of Contents
TABLE OF CONTENTS WELCOME ..... . 1 Install Bagger Hose ....14 Assemble Mesh Bags . -
Page 3: Welcome
WELCOME Congratulations on your purchase and welcome to the Ariens family! Every machine in the Ariens lineup is designed for long-lasting and unsurpassed performance. We are confident your machine will be part of your family for many years to come. -
Page 4: Safety
WILL RESULT in death or instructions and warnings may cause death serious injury. or serious injury. If you have purchased this product from an Ariens dealer, the dealer can 2. Warning provide you with training. Familiarize yourself and any other operators... -
Page 5: Safety Decals
SAFETY DECALS ALWAYS replace missing or damaged safety decals. Replacement decal part numbers are The safety decals on your machine are visual found in the parts manual for your machine reminders of the important safety information and may be ordered from your dealer. in this manual. -
Page 6: Safety Instructions
Safety Decal Descriptions SAFETY INSTRUCTIONS The following safety instructions are based 1. WARNING! on B71.1, B71.4 specifications of the American National Standards Institute and ISO 5395 in effect at the time of production. Stop engine and wait for all moving parts to stop before Safe Practices for Ride-On Mowers opening cover. - Page 7 Children are often attracted to the machine explain it to them. Manuals are available in and the mowing activity. NEVER assume other languages at www.ariens.com. that children will remain where you last saw Only run the engine in well ventilated areas.
- Page 8 Mow up and down slopes, NEVER across. Service Exercise caution when changing direction Keep machine in good working order. on slopes. Use caution while operating near Replace worn or damaged parts. dropoffs. Use caution when servicing blades. Wrap Avoid mowing wet grass. Wet surfaces can the blade(s) or wear gloves.
-
Page 9: Assembly
Description Number Studded Wing Knob 07500226 Bagger Boot – 42" 09154000 WARNING: AVOID INJURY. Read and understand the entire (Model 815046) Safety section before proceeding. Bagger Boot – 52" 09156900 (Model 815047) Remove contents from carton carefully. Place L Bracket... -
Page 10: Install Front Weight Tray & Counterweight
ALWAYS remove counterweight when bagger is removed from unit. Model 815046 See Figure 4. Model 815047 1. Remove two 5/16" x 3/4” and 1/2" x 1 3/4” round head square neck bolts, two metal spacers, two 1/2”... - Page 11 4. Secure the front of footrest/weight tray 6. Adhere the grip adhesive (item 3) above assembly to the chassis with hardware the round head square neck bolts on the installed in step 3 and two 1/2” center back of footrest. See Figure 7. locking flange nuts removed earlier.
-
Page 12: Removal
3. Raise the front of the unit to gain access to the underside of deck. Securely support the unit. Model 815046 1. Remove four 5/16” round head square neck bolts and four 5/16” nuts securing discharge chute and plate to deck. Retain... -
Page 13: Install Hi-Lift Mower Blade (Model 815047)
2. Remove 5/8” nut and 21/32” washer retaining right mower blade and remove blade. Retain hardware for reinstallation and blade for operation without bagger. See Figure 12. Figure 13 INSTALL BAGGER BOOT Figure 12 See Figures 14 and 15. 1. Install bagger boot (item 20) to deck with INSTALL HI-LIFT MOWER BLADE two 5/16”... -
Page 14: Install Mount Post
Model 815046 Model 815047 Figure 15 3. Return unit to operating position. INSTALL MOUNT POST 1. Install receiver (item 25) onto right rear frame with two 3/8” x 1" hex bolts (item 27) and two 3/8” locking nuts (item 26). Tighten hardware. -
Page 15: Install Hood Assembly
INSTALL SUPPORT STRAP 3. Install studded wing knob (item 19) into front of receiver. Tighten studded wing 1. Attach support strap (item 22) to hood knob and hardware installed in step 2. assembly receiver using 1/2” x 2 3/4” hex bolt (item 28), 17/32”... -
Page 16: Install Bagger Hose
INSTALL BAGGER HOSE 2. Secure support strap to mower frame with clevis pin (item 10), 13/32” flat See Figure 21. washer (item 9), and bowtie pin (item 11). 1. Install hose (item 23) fully on bagger Tighten hardware installed in step 1. boot. -
Page 17: Assemble Mesh Bags
ASSEMBLE MESH BAGS INSTALL MESH BAG ASSEMBLIES See Figure 22. 1. Install two mesh bags (item 2) onto two 1. Install mesh bag assemblies to hood bag frames (item 29) by routing the bag assembly frame. The smooth heat- frames in the open end of the mesh bags. resistance surfaces of the mesh bags must face the engine. -
Page 18: Removal
18" mower blade. See Figures 12 4. Choose a slow ground speed. and 13. Stopping 8. Model 815046 Only: Reinstall deflector strip. See Figure 10. WARNING: Lower attachment, 9. Reinstall discharge chute and plate with stop engine, and remove key to original hardware. -
Page 19: Airflow Indicator
AIRFLOW INDICATOR EMPTYING MESH BAGS See Figure 24. If bagger stops picking up grass clippings, the mesh bags are likely full. When the airflow indicator is pointed straight up, the air is restricted which indicates one or WARNING: NEVER open hood more possible problems: assembly while the engine is •... -
Page 20: Unclogging Bagger
1. Stop engine and remove ignition key. structural damage. Replace any worn or Wait for all moving parts to stop. damaged parts with Ariens service parts. 2. Flip thumb latch and remove hose. • Clear away debris in boot, hose or hood 3. -
Page 21: Troubleshooting
Bags on page 17. pick up grass Unclog bagger. See Unclogging Bagger or leaves. Bagger is clogged. on page 18. SPECIFICATIONS Model Number 815046 815047 Description 42" Edge Bagger 52" Edge Bagger Added Length to 49.8 (19.6) Unit – cm (in) Added Width to Mower Deck –... -
Page 22: Warranty
“Commercial Use.” If any product is rented or leased, then the duration of these warranties shall be 90 days after the date of purchase. An authorized Ariens dealer will repair any defect in material or workmanship, and repair or replace any defective part, subject to the conditions, limitations and exclusions set forth herein. Such repair or replacement will be free of charge (labor and parts) to the original purchaser;... - Page 23 Exclusions – Items Not Covered by This Warranty • Parts that are not genuine Ariens service parts are not covered by this warranty and may void the war- ranty if the parts result in premature wear or damage to the product.
- Page 24 Parts and Accessories Service replacement parts and non-serialized accessories are warranted for 90 days from date of purchase. Parts and accessories must be installed by an authorized Ariens dealer to be covered. Labor is not included. Customer Responsibilities Register the product immediately at the time of sale. If the dealer does not register the product, the customer must register the unit on-line at www.ariens.com.
- Page 25 Disclaimer AriensCo may from time to time change the design of its products. Nothing contained in this warranty shall be construed as obligating the AriensCo to incorporate such design changes into previously manufactured products, nor shall such changes be construed as an admission that previous designs were defective. Limitation of Remedy and Damages AriensCo liability under this warranty, and under any implied warranty that may exist, is limited to repair of any defect in workmanship, and repair or replacement of any defective part.
- Page 26 655 West Ryan Street Brillion, WI 54110 www.ariens.com parts.ariens.com...