Serial Interface Cable; Az221; Az222 - Fujitsu YOKOGAWA AF220 Application Note

4.3 Serial Interface Cable

Two serial interface cables are available.

4.3.1 AZ221

If the COM-port of the host PC uses a 9-pin D-Sub connector then interface cable AZ221
has to be used.

4.3.2 AZ222

In case, that the COM-port of the host PC uses a 25-pin D-Sub connector, the interface
cable AZ222 has to be used.
MCU-AN-390087-E-V10
FLASH PROGRAMMER YOKOGAWA AF220/221
Introduction
Figure 1-5: Serial interface cable AZ221
Figure 1-6: Serial interface cable AZ222
- 8 - © Fujitsu Microelectronics Europe GmbH