Installation; Using Of The Header Board For Extended Bus Interface At 3V Level; Using Of New Header Board Mb2197-127-3V3; Using Of Modified Header Board Mb2197-127 - Fujitsu MB91360 Series User Manual

2 Installation

2.1 Using of the header board for extended bus interface at 3v level

2.1.1 Using of new header board MB2197-127-3V3

For the extended bus interface at 3v level we using the new header board
MB2197-127-3V3, designed with separately 3v and 5v power supply lines.

2.1.2 Using of modified header board MB2197-127

If VDD pins 25,51,182 and 198 are connected to 3.3v and VDD-pins 79,82,144,160 and 118
to 5v externally the external bus interface can be normally operated at 3.3v.
Please note that the Eva-chip MB91V360 doesn't support the external bus interface at 3.3v
levels.
The Level-Shifter board is designed to convert 5v to 3.3v bus interface for this.
The problem is yet, that the various VDD-pin (3.3v and 5v) are connected on the header
board. Therefore, we have to cut the 3.3v pins 25,51,182 and 198 on the pin header of the
header board MB2197-127.
Figure 3: Modification of Pin-Header Board MB2197-127
UG-910005-24
LEVELSHIFTER BOARD
Chapter 2 Installation
105
156
104 157
182
198
208
51 25
53
52 1
Pin Header
MB2197-127
- 8 - © Fujitsu Microelectronics Europe GmbH