Advertisement
Built-In (BI) Series
Built-In (BI) Series
Door Assembly
The door assembly is secured to the top and bottom
door hinges with screws. The post of the bottom door
hinge fits down into a bearing in the bottom cabinet
hinge assembly's door adjuster.
To remove a door assembly, the top hinge assembly
must be removed first. Then, with one hand at each
side of the door, open the door forty-five to ninety
degrees and lift it off of the bottom cabinet hinge
assembly. (See Figure 6-91)
Bottom Cabinet Hinge Assembly
The bottom cabinet hinge assembly is attached to the
bottom of the unit with bolts.
To remove the bottom cabinet hinge assembly, first
remove the top hinge assembly and the door. Then,
using a 1/2" wrench or socket, extract the cabinet hinge
mounting bolts and pull the hinge assembly from the
unit. (See Figure 6-92)
(SWS #4380000)
(SWS #4380000)
Bottom Cabinet
Hinge Assembly
Figure 6-91. Door Assembly Removal
Bottom Cabinet
Hinge Assembly
Figure 6-92. Cabinet Hinge Assembly Removal
6-37
Component Removal
Bolts
7040317 - Revision A - September, 2015
Advertisement
