Using Magic-I Visual Effects; Adjusting Resolution - BenQ Joybook S57 Series User Manual

Video Proc Amp
2. Under the
Frequency
to 50Hz.

Using Magic-i Visual Effects

"Magic-i Visual Effects" automatically launches with the
"Capture", "Masque", "Photo Booth" modules, and "Chat"
function of "WebCam Companion 3". You can use "WebCam
Companion 3" with "Magic-i Visual Effects" to enhance the
capture and video chat experience. Use a rich set of effect
templates to make images and video chat fun and entertaining.
"Magic-i Visual Effects" is available when the resolution is set
to 320 x 240 pixels or lower. Refer to
page 45 for setup.
PowerLine
tab, change
"Adjusting resolution" on
Before you start using "Magic-i Visual Effects", click
input the values to change the settings appropriately by
dragging the scroll bars. You can also click
and the program will set the calculated values automatically.
Available settings may vary by module.
When the settings are complete, you are ready to use "Magic-i
Visual Effects" by selecting desired options from the left,
Face Tracking Digital Zoom
including ,
Theme Avatar , Enhance
, , and
(at the upper right corner) to read the Help file.

Adjusting resolution

When the CPU performance is low, you may need to adjust the
resolution to make 'Magic-i Visual Effects' run correctly. Please
change the default resolution "320 x 240 (QVGA)" to a lower
one. You can select "176 x 144 (QCIF)" or "160 x 120 (SQVGA)".
and
Auto
in each setting
Filter, Frame
, ,
Masque
. For details, click
Using your Joybook 45