Restoring Your System To Factory Default Settings; Restoring Your System To Your Own Backup System Image; Restoring Your System From A Restore Point; Reinstalling Bundled Applications And Drivers - BenQ Joybook S57 Series User Manual

Restoring your system to factory default settings

QDataTrove allows you to restore your system drive (C: drive)
to the factory default configuration.
Restore
1. In QDataTrove, click the
2. Click the button to select
Factory Default Settings
3. A dialog box asking whether you wish to adjust the size of
disk partition appears.
• If you select "Yes", all programs you installed or data you
saved on both the C: drive and the D: drive will be erased.
• If you select "No", all programs you installed or data you
saved on the C: drive will be erased. However, data on the
D: drive will not be affected.
4. Follow the remaining on-screen instructions to complete the
operation.
Restoring your system to your own backup
system image
QDataTrove allows you to restore your system drive (C: drive)
to a previous state with your own backup system image.
To perform this operation, a backup system image file is
required. For details about making your own backup system
image, refer to "Backing up your system into a single file" on
page 51 or "Backing up your system into a disc" on page
Restore
1. In QDataTrove, click the
2. Click the button to select
Backup Image .
tab.
Full System Restore -
.
tab.
Full System Restore -
Open
3. An dialog box appears. Browse to select a backup
system image, and then click
4. A confirmation message appears. To proceed with the
operation, click
5. Follow the remaining on-screen instructions to complete the
operation.

Restoring your system from a restore point

QDataTrove allows you to restore your system drive (C: drive)
to previous states by restoring from a list of restore points (if
available).
To perform this operation, a restore point is required. For
details about manually creating a restore point, refer to
"Creating a restore point" on page
1. Click the
Point .
System Restore
2. A
Follow the step-by-step on-screen instructions to complete
system restore.
For more information about System Restore, refer to Start >
Help and Support in Windows Vista.

Reinstalling bundled applications and drivers

QDataTrove allows you to reinstall the applications and drivers
52.
that are bundled with the Joybook you purchased.
1. Click the
and Drivers
.
2. You can perform the following tasks on the main screen that
appears.
Recovering your system using QDataTrove
Open
.
Yes
.
52.
Restore from a Restore
button to select
wizard then appears on the screen.
button to select Reinstall Applications
53