Creating Recovery Discs Or Application And Driver Dvd; Creating A Factory Recovery Cd/Dvd - BenQ Joybook S57 Series User Manual

• To install drivers, click
• To install applications, click
Application .
• To view information about the applications and drivers
that are bundled with your Joybook, click
Software List
3. Follow the remaining on-screen instructions to complete the
operation.
Creating recovery discs or Application
and Driver DVD
If you intend to use discs to restore your system and reinstall the
bundled applications and software programs that came with
your Joybook, insert the recovery discs and the Application and
Drivers DVD created using QDataTrove into the optical drive of
your Joybook, and follow the on-screen instructions.
To use this function, your Joybook must come with a CD/DVD
burner. If your model does not come with a CD/DVD burner,
use an external DVD burner instead if you wish to create
discs.
QDataTrove allows you to create the following important discs
for your system:
• Recovery discs:
• Factory Recovery CD/DVD
• User Recovery CD/DVD
• Application and Driver DVD
54 Recovering your system using QDataTrove
Install Joybook Driver
Install Joybook
View
.

Creating a Factory Recovery CD/DVD

.
You can use QDataTrove to create a recovery disc that includes
factory default system image, and a disc that includes
applications and drivers that are bundled with your Joybook.
Important:
It is strongly recommended to create Factory Recovery DVD
immediately once your Joybook is ready for use.
1. Click the
CD/DVD
.
2. Select a disc type from the
menu. Click
3. Insert a blank disc when prompted to do so, and then click
Yes
.
4. Select your preferred burning speed, and then click
5. The disc burning process starts. A
Recovery CD/DVD
displays the current status.
Please note that the burning process cannot be interrupted
once started.
6. Continue to create a factory default Application and Driver
DVD. Repeat Step 2 to Step 5 to complete the disc burning
process.
7. After disc burning finishes (the progress bar shows 100%
completion), click
window to proceed.
Exit
8. Click >
Store the discs in a safe place for future use.
Create Factory Recovery
button to select
Disc Category
OK
to proceed.
Create Factory
window appears on the screen and
at the upper right corner of the
Yes
to leave the application.
drop-down
OK
.