Table of Contents
Advertisement
Video Proc Amp
2. Under the
Frequency
to 50Hz.
Using Magic-i Visual Effects
"Magic-i Visual Effects" automatically launches with the
"Capture", "Masque", "Photo Booth" modules, and "Chat"
function of "WebCam Companion 3". You can use "WebCam
Companion 3" with "Magic-i Visual Effects" to enhance the
capture and video chat experience. Use a rich set of effect
templates to make images and video chat fun and entertaining.
"Magic-i Visual Effects" is available when the resolution is set
to 320 x 240 pixels or lower. Refer to
page 29
for setup.
PowerLine
tab, change
"Adjusting resolution" on
Before you start using "Magic-i Visual Effects", click
input the values to change the settings appropriately by
dragging the scroll bars. You can also click
and the program will set the calculated values automatically.
Available settings may vary by module.
When the settings are complete, you are ready to use "Magic-i
Visual Effects" by selecting desired options from the left,
including
Face Tracking
,
Digital Zoom
,
Theme
,
Avatar
Enhance
, and
(at the upper right corner) to read the Help file.
Adjusting resolution
When the CPU performance is low, you may need to adjust the
resolution to make 'Magic-i Visual Effects' run correctly. Please
change the default resolution "320 x 240 (QVGA)" to a lower
one. You can select "176 x 144 (QCIF)" or "160 x 120 (SQVGA)".
and
Auto
in each setting
,
Filter, Frame
,
Masque
. For details, click
Using your Joybook Lite
29
Advertisement
Table of Contents
