Chapter 1: About The Product - ADC Campus RS Destop Unit User Manual

Campus-rs line unit user manual
Table of Contents

Advertisement

A
The Campus-RS
card in a Campus-Star chassis, comprises half of a High-bit-rate Digital
Subscriber Line (HDSL) transmission system. When connected to another
Line Unit installed in a Campus-Star
Unit, the Line Unit can transport digitized voice, data, and video signals over
existing copper wire at a number of different HDSL transmission rates.
The interface card mated to the Line Unit determines the
HDSL transmission rates available. Some cards may support
fewer rates or only one rate. See the manual for the interface
card to determine the available HDSL transmission rates for
the system.
The Campus-RS system is compatible, over the HDSL link, with earlier
versions of Campus products. You can connect the Campus-RS Line Unit,
through the HDSL link, to a Campus-E1
Desktop Unit or Line Unit. The Campus-RS system is not compatible with
Campus-384
All earlier versions of Campus products are manufactured to operate at a
single HDSL transmission rate. To establish an HDSL link with an earlier
product, the Campus-RS standard HDSL Operating Mode supports three
preset transmission rates:
2.048 Mbps (E1)
1.544 Mbps (T1)
768 kbps
Campus-RS Line Unit User Manual
BOUT THE
(Rate Selectable) Line Unit, mated with an RS interface
®
Desktop Units or Line Units.
P
RODUCT
®
chassis or to a Campus-RS Desktop
®
, Campus-T1
1
®
, or Campus-768
®
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Campus-rs

Table of Contents