Install The Line Unit - ADC Campus RS Destop Unit User Manual

Installing and Configuring the Line Unit
Install the NID on the HDSL line between the HDSL jack and the Telephone
Company (Telco) demarcation point.
Telco demarcation point
ADC also suggests providing power line protection for critical circuits in high
lightning areas. Use conditioned AC voltage, furnished through an
Uninterruptible Power Supply (UPS), that is bonded to a good facilities
ground. This provides additional protection against voltage transients
entering through the power lines.
I
NSTALL THE
To install the Line Unit:
1 Install the interface card into the back of the Campus-Star chassis,
following the instructions in the User Manual for the card.
Make sure you install the interface card before the line unit.
Installing the card with the line unit already installed may
cause damage to the card, the line unit, or both.
2 Ensure that the retaining latch is pulled completely forward and down.
10
HDSL
NID
L U
INE NIT
May 29, 2002
HDSL line port
jack
HDSL line
Campus-RS Line Unit User Manual
Campus-RS Unit