ADC ComProtect Building Entrance Terminals (BET) Specification Sheet

ComProtect
Enclosed, Integrated Protection with LSA-PLUS
100 pair
ADC's ComProtect Building Entrance Terminals provide high-density primary protection at commercial
demarcations and are fully compliant to UL
both indoor and outdoor applications and provide up to 50% space savings over traditional Building
Entrance Terminals using 5-pin protection.
Features:
• Telcordia approved ComProtect protection
modules safeguard valuable cable plant and
equipment from voltage surges and spikes
• Lockable metal enclosure with Telco
override cover and a splicing chamber with
the choice of either 710 or MS
connectors
• LSA-PLUS cross connect field and protection
field combined for High-Density Solution
• Lightweight, compact and removable top to
enable stacking units
• Instructions, template and mounting
hardware included to mount the terminal
directly to a wall
• Reduced size over traditional BET footprint
for tight to fit spaces
MS is a registered trademark of 3M.
2®
UL ® is a registered trademark of Underwriters Laboratories.
Telcordia is a registered trademark of Telcordia Technologies, Inc.
®
w w w . a d c . c o m
Building Entrance Terminals (BET)
®
and Telcordia
®
splice
2®
• + 1 - 9 5 2 - 9 3 8 - 8 0 8 0
Series 2 Blocks
®
specifications. These units can be used in
®
Applications:
• Primary protection at commercial and MDU
demarcation points
• Primary protection for campus environments
Compliances:
• UL ® 497 listed
• 100% compliant with Telcordia GR-937
• 1 - 8 0 0 - 3 6 6 - 3 8 9 1
50 pair