Arri Lighting Service Manager - ARRI L Series User Manual

Manufacturer commands
Command
RDM Fan Mode
PID: 0x8001
RDM Status LED
PID: 0x8002
Supported values from -1 to +1
RDM DMX Signal Lost Mode
PIS: 0x8005

ARRI Lighting Service Manager

Please find information about the features and the functionality of the ARRI Lighting Service Manager in the user manual for the
ARRI Lighting Service Manager, which can be downloaded with the ARRI Lighting Service Manager software-bundle from the
ARRI web site www.arri.com/lightingsoftware free of charge.
32
Description
Changes the FAN mode of the fixture
- this message supports Set and Get commands
- the first data byte is used to show / change the fan mode
USER_FAN_MODE_LOW = 1
USER_FAN_MODE_VARI = 2
USER_FAN_MODE_HI45 = 3
Switch on /off indication LEDs and LCD back light
- this message supports Set and Get commands
- the first data byte is used to switch indication LEDs on and off
LEDs and LCD back light on = 0
LEDs and LCD back light off = 1
If the DMX signal gets lost or the DMX device is unplugged the LED fixture holds the
last valid signal, or it holds the last valid signal for two minutes and then douses or
switches off immediately.
Supported values:
0 -> hold
1 -> hold 2 minutes
3 -> switch off
GET SET
X X
X X
X X