ARRI L Series User Manual page 21

Mode Hybrid Active
OFF X
LOW X X
HI X
A-LOW X
A-HI X
VARI X X
PASS X
HI45 X
Description
The fan is turned off, it may
occur that the lamphead turns
itself off due to overheating.
Once the lamphead has cooled
down it can be turned on and
used again.
The fan operates constantly at
low speed (silent).
The fan operates constantly at
maximum speed.
The fan operates from 80%
intensity with 1050 rev/min.
The fan operates from 80%
intensity with maximum speed.
The fan is controlled via the
light-engine temperature.
No fan, light output is reduced
by 20%.
Optimized for an ambient tem-
perature of 45°C / 113° F, the fan
operates at max. speed,
light output is reduced by approx
15%.
To set the DMX address
• Press the + / [up] or - / [down] button, until SETUP is displayed
left in the display.
• Confirm with the ENTER button. Press the + / [up] or - / [down]
button until DMX is displayed.
• Confirm with the ENTER button. Press the + / [up] or - / [down]
button until CHAN is displayed.
• Confirm with the ENTER button. The current DMX address is
displayed.
• Press the + / [up] or - / [down] button to select the DMX ad-
dress. Confirm the selected address with the ENTER button.
The DMX address blinks three times for confirmation.
• Press the FUNCT button to leave the menu.
21