Juniper EX2300 Quick Start Manual page 2

Hide thumbs Also See for EX2300:

Power cord with a plug appropriate for your geographical location (provided) and a power cord retainer (provided)

To connect DC power to the switch, you need:

One or two (depending on the number of power sources you will use) DC power cables (12–14 AWG) with ring lugs

(Molex 190700067 or equivalent) attached—none provided

To perform initial configuration of the switch, you need:

Ethernet cable with an RJ-45 connector attached (provided)

RJ-45 to DB-9 serial port adapter (provided)

Management host, such as a laptop or PC, with an Ethernet port (not provided)

addition or change to the installation base or if the installation base is moved. Juniper Networks will not be held accountable

for not meeting the hardware replacement service-level agreement for products that do not have registered serial numbers

or accurate installation base data.

Update your install base at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp.

WARNING:

the ESD grounding strap to your bare wrist, and connect the strap to the ESD point on the chassis.

Mount the EX2300

You can mount an EX2300 switch on a desk or a level surface, on two or four posts of a rack or cabinet, or on a wall. This

guide describes the procedure to mount the switch on two posts of a rack.

Mounting an EX2300 switch on a rack requires one person to lift the switch and a second person to install the mounting

screws.

1. Place the rack in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the

building structure.

NOTE:

When you mount multiple units on a rack, mount the heaviest unit at the bottom and mount the

other units from bottom to top in decreasing order of weight.

2. Align the mounting brackets along the front of the side panels of the chassis.

3. Attach the brackets to the chassis by using the mounting screws. Tighten the screws.

Ensure that you understand how to prevent electrostatic discharge (ESD) damage. Attach

Table of Contents