Panasonic KX-TGP700 Operating Instructions Manual page 63

Using the Base unit Contacts (when connected to a base unit other than the
Panasonic base unit only)
[In standby mode]
1. /[ ]
2. [ ]/[ ]: "Base PBK"
3. Enter the name or the first character(s) of the desired name.
4. [ ]/[ ]: Select the desired item.
5. Press the [CENTER] navigation key.
6. [ ]/[ ]: Select the desired phone number.
7. / : Make a call
8. : End the call
Note
• For details about making a call using the Base unit Contacts, see 7.3.4 Searching for
an Item in the Base Unit Contacts, page 95.
Using the Remote Contacts (when connected to the KX-TGP600 only)
[In standby mode]
1. /[ ]
2. [ ]/[ ]: "Remote Phonebook"
3. [ ]/[ ]: Select the desired type of contacts.
4. Enter the name or the first character(s) of the desired name.
5. [ ]/[ ]: Select the desired item.
6. Press [ ] or [ ] to select the desired phone number.
7. / : Make a call
8. : End the call
Note
• If the Remote Contacts is not permitted, this feature cannot be used. For details,
contact your phone system dealer/service provider.
• For details about making a call using the Remote Contacts, see 7.4.1 Searching for
an Item in the Remote Contacts, page 97.
/[CENTER]
/[CENTER]
[CENTER]
3.3.5 Using the Contacts
/[CENTER]
/[CENTER]
63