Before Use; Installation - Prem-I-Air EH1614/EU Manual

2.3kw 8000 btu/hour

Table of Contents

These instructions should be read carefully and left with the user of the product

for future reference.

Inspect the product including its cable and plug for any signs of damage. If the

product is damaged, DO NOT use it, and contact your supplier immediately. The

appliance contains a refrigerant gas, so must be kept upright at all times. After

unpacking wait 3 hours for the refrigerant gas to stabilise before use. The

following is a list of parts that should be included in the packaging.

Stand the EH01614 on a firm, flat; level surface at least 30cm (12") from the

nearest wall. Before use you will need to install the drainage pipe at the rear of

the unit.

Installing Drainage Pipe

Rubber

Drain Port

Plug

First remove the rubber plug from the drain port on the rear of the air

IMPORTANT

Installer and Users please note:

BEFORE USE

Page 2

Table of Contents