Before Use; Installation - Prem-I-Air EH1672 User Manual

IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product
for future reference.

BEFORE USE

Inspect the product including its cable and plug for any signs of damage. If the
product is damaged, DO NOT use it, and contact your supplier immediately. The
appliance contains a refrigerant gas, so must be kept upright at all times. After
unpacking wait 3 hours for the refrigerant gas to stabilise before use.

INSTALLATION

Stand the EH1672 on a firm, flat, level surface. Connect the exhaust hose as
follows: expand a small section of the end, and screw into the indoor adaptor;
then slide the indoor adaptor into the slot at the back of the unit. Expand a small
section of the other end of the hose, and screw into the fish-tail-shaped adaptor.
Fish-Tail
Adaptor
Indoor Adaptor Hose
Window Adaptor
Louvers
Slide the two-part window adaptor to the correct length to fit the window. Close
the window as far as possible to keep the window adaptor in place. Clip the fish-
Page 2