Stamina 55-1489 Owner's Manual page 12

ASSEMBLY INSTRUCTIONS
STEP 10
Insert the FOOTBAR(10) into the SLIDING FRAME(8) and secure with HEX BOLTS(M6x1x35mm)(62),
WASHERS(M6)(81), and NYLOCK NUTS(M6x1)(63). The HEX BOLTS(M6x1x35mm)(62) must fit inside
the hex-shaped holes in the SLIDING FRAME(8) to properly secure the FOOTBAR(10).
STEP 11
Insert the ADJUSTABLE INSTEP FRAME(9) into the SLIDING FRAME(8) and lock in one of the adjustment
holes with the SHORT PULL PIN(59). Slide the FOAM PADS(53) on both ends of the ADJUSTABLE
INSTEP FRAME(9).
NOTE: There are four adjustment holes in the SLIDING FRAME(8) which allow the ADJUSTABLE INSTEP
FRAME(9) to be attached in four different positions. Find the position which is most comfortable
for holding your ankles while performing the back stretching exercise.
54
12
9
59
8
81
63
54
62
10