Stamina 55-1532 Owner's Manual
  1. Manuals
  2. Brands
  3. Stamina Manuals
  4. Home Gym
  5. 55-1532
  6. Owner's manual

Stamina 55-1532 Owner's Manual

Gravityinversion therapytable
Hide thumbs Also See for 55-1532:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
Owner's Manual
CAUTION: 1. Weight on this product should not exceed 250 lbs.
2. Class H equipment: This equipment is for home
use only. It is not for commercial use.
2006, 10
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
www.staminaproducts.com
!
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
MODEL NUMBER
55-1532
STAMINA PRODUCTS
MADE IN CHINA
Product May Vary Slightly
From Pictured.
2006 Stamina Products, Inc.
!

Advertisement

Table of Contents
loading

Related Manuals for Stamina 55-1532

Summary of Contents for Stamina 55-1532

  • Page 1 MADE IN CHINA use only. It is not for commercial use. Product May Vary Slightly From Pictured. This Product is Produced Exclusively by 2040 N. Alliance, Springfield, MO 65803 Customer Service Number 1 (800) 375-7520 www.staminaproducts.com 2006, 10 2006 Stamina Products, Inc.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Page Page Safety Instructions Maintenance Instructions Before You Begin Product Parts Drawing Hardware Identification Chart Parts List Assembly Instructions Warranty Operational Instructions Notes Storage Fax/Mail Ordering Form SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following safety instructions before Therapy using the Gravity Inversion Table.
  • Page 3 Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time. Friday, 8:00 A.M. - 3:00 P.M., Central Time. TELEPHONE ONLINE MAIL CUSTOMER SERVICE CUSTOMER SERVICE CUSTOMER SERVICE STAMINA PRODUCTS, INC. Tel: 1 (800) 375-7520 Fax: (417) 889-8064 parts@staminaproducts.com ATTN: Customer Service cust-srvc@staminaproducts.com P.O. Box 1071 www.staminaproducts.com...

  • Page 4: Before You Begin

    BEFORE YOU BEGIN Thank you for choosing the Gravity Inversion Although Stamina manufactures its products with Therapy Table. We take great pride in producing the finest materials and uses the highest standards this quality product and hope it will provide many...

  • Page 5: Hardware Identification Chart

    HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers, the end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws.

  • Page 6: Assembly Instructions

    ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed.
  • Page 7 ASSEMBLY INSTRUCTIONS SLOTS STEP 3 Slide the bottom of the two PIVOT ARMS(5) into the brackets located at each side of the MAIN FRAME(4). Align the desired hole on the arm with the peg on the bracket, and insert the peg into the hole to lock the PIVOT ARMS(5) in position.
  • Page 8 ASSEMBLY INSTRUCTIONS STEP 5 Attach the FOOTREST(8) onto the HEIGHT ADJUSTMENT BEAM(6) with the ADJUSTMENT KNOB(9). NOTE: The four adjustment holes in the FOOTREST(8) allow the FOOTREST(8) to be attached in four different positions. Start with one of the center positions and adjust if necessary. Use the higher position holes if users are taller than average.
  • Page 9 ASSEMBLY INSTRUCTIONS BUCKLE STEP 8 Install the HEIGHT ADJUSTMENT BEAM(6) into MAIN FRAME(4) by pulling the LARGE SPRING PIN(18) on the MAIN FRAME(4) and inserting the HEIGHT ADJUSTMENT BEAM(6) as shown. For added safety, thread the LOCKING KNOB(19) into back side of the MAIN FRAME(4). Do not use the Gravity Inversion Therapy Table until you have verified your height setting.

  • Page 10: Operational Instructions

    OPERATIONAL INSTRUCTIONS GENERAL PRECAUTIONS Use the lowest holes in the PIVOT ARMS(5) until you become familiar with the Gravity Inversion Therapy Table. Do not use the Gravity Inversion Therapy Table alone. Always have a helper available in case assistance is needed in recovering from the decline position. Make sure that the HEEL HOLDERS(12) and FOAM PADS(31) are holding your feet securely.
  • Page 11 OPERATIONAL INSTRUCTIONS USING THE INVERSION TABLE Start by lying fully back on the bed with your hands at your side, or resting on your thighs. Keeping your hands close to your body begin to raise your arms slowly allowing the table to rotate backward.
  • Page 12 OPERATIONAL INSTRUCTIONS SUGGESTIONS FOR USE Begin slowly: Invert only 15-20 degrees to begin with. Stay inverted only as long as you are comfortable. Return upright slowly. Make gradual changes: Increase the angle only if it is comfortable. Increase the angle only a few degrees at a time.

  • Page 13: Storage

    STORAGE FOLDING THE INVERSION TABLE The Gravity Inversion Therapy Table can be easily folded for storage. To fold the Gravity Inversion Therapy Table loosen the LOCKING KNOB(19) and pull out the LARGE SPRING PIN(18). Now, slide the HEIGHT ADJUSTMENT BEAM(6) all the way up into the MAIN FRAME(4) until the ADJUSTABLE INSTEP FRAME(7) is just below the MAIN FRAME(4), release the LARGE SPRING PIN(18) and slide the HEIGHT ADJUSTMENT BEAM(6) slightly up or down until the spring pin locks the beam in place.

  • Page 14: Product Parts Drawing

    PRODUCT PARTS DRAWING BACK FRONT...

  • Page 15: Parts List

    PARTS LIST DIAGRAM# PART NAME Front Frame Rear Frame Folding Linkage Main Frame Pivot Arm Height Adjustment Beam Adjustable Instep Frame Footrest Adjustment Knob Pad Tube Heel Holder Bracket Heel Holder Spring Roll Pin Small Spring Pin Scale Decal Bushing Large Spring Pin Locking Knob Foam Cushion...

  • Page 16: Warranty

    To implement this limited warranty, send a written notice stating your name, date, and place of purchase and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited warranty, you will be requested to return the product or part to us for free repair or replacement at our option.

  • Page 17: Notes

    NOTES...

  • Page 18: Fax/Mail Ordering Form

    FAX/MAIL ORDERING FORM Please do not return the product. For your convenience, Stamina has a Customer Service Department with a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520 (in the U.S.) from 7:30 A.M. - 5:00 P.M. Central Time, Monday - Thursday and 8:00 A.M. - 3:00 P.M. on Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064.

Table of Contents