Table of Contents
Advertisement
S
5-2
ervice
LED LIGHT REPLACEMENT
1. Turn lights off at the switch.
2. LED lamps are held in place with clips
along the outside of the doors at each side.
3. Unplug the wire harness from the LED.
4. Replace with like LED fixture.
5. Turn light switch back on.
LED POWER SUPPLY REPLACEMENT
Turn off and unplug case.
LED power supply is located in the center
mullion.
1. Remove sheet metal backing plate from
back of center mullion (6 screws).
2. Replace with similar Hussmann power
supply.
3. Reassemble.
P/N 3003960_A
Power Supply
GSVM ACCESSORIES
The following is a description of the various
accessories available for the GSVM.
Leveling Guides— 6" adjustable legs screw
into the welded corner plates in the case base.
These legs have a threaded stud.
Colored Accent Panel — This panel can be (a.)
the top front panel over the product, (b.) the
panel behind the bumper, or (c.) the access
panel below the bumper panel, or any
combination of these.
Wire Product Stop Kit — This kit consists of
a 2 in. high chrome plated open wire stops for
the standard shelf. This stop is mounted under
tension and should not be confused with the
wire front in the partition kit.
U.S. & Canada 1-800-922-1919 • Mexico 1 800-890-2900 • www.hussmann.com
Advertisement
Table of Contents
