P/N 3003960_A
TEMPERATURE ADJUSTMENT
1. Rotate the adjustment knob counter clock-
wise for a warmer setpoint or clockwise for
a colder setpoint.
2. While adjusting the temperature, the display
shows the setpoint (cut out value). A few
seconds after the temperature is set, the
controller reverts to the sensed temperature
in the merchandiser.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Model GSVM 4060F
Model GSVM 4060F
3. To verify merchandiser settings, turn the
dial to warm and cold as shown above.
Output readings should be within one
degree of the temperatures shown above.
The dial should be set at Postition 3 for
conducting DOE compliance testing.
GSVM 4060F Merchandisers
2-7