Using The Help System For Automated Activities; Accessing The Mx-810'S Setup Menus - Universal Remote Control Complete Control MX-810 Operating Manual

Using the Help System for Automated Activities

After selecting an activity, if any of the devices or components don't seem to
be on or are set incorrectly, use the Help button. There may be several help
screens to help you with your activity as shown here:
Once the help screens appear, look at your system. If anything is off, use the buttons on the first screen to
power them on, then press NEXT (the PAGE button). The second and third screens enable you to correct an
input. Additional screens may appear if your system is custom. Exit help by pressing the HELP button again.

Accessing the MX-810's Setup Menus

The MX-810 has internal setup menus that enable you to change the settings
that control your color screen, the button lighting, battery warnings and the
clock. To access these settings, you must press and hold two
buttons at the same time as shown here:
MX-810 O M
WNERS
Page 7
ANUAL
At the same time, press and
hold both the ACTIVITIES
button and the ENTER but-
ton. When the SETUP screen
appears, you can release the
two buttons.