Setting The Button Beep Volume - Universal Remote Control Complete Control MX-810 Operating Manual

Power Remaining and Battery Warning Settings
On this screen, you can see how much battery charge remains and you
can reset the "Low Battery" warning to either 10, 20 or 30 percent. The
battery indicator at the top left of the MX-810 screen will flash when your
low battery warning level is reached.
System Info
See how much memory you've used on this screen.

Setting the Button Beep Volume

Use the buttons next to OFF and LOUDEST to adjust how loud the beeps
are.
MX-810 O M
WNERS
Note the current remaining battery charge here.
Use the LESS and MORE buttons to set the battery
warning.
Press the SAVE button to save your setting.
You cannot make any changes to the data displayed
on this screen. It is informational only.
Press the OK button to exit.
Use the OFF and LOUDEST buttons to set the Beep
volume.
Press the SAVE button to save your setting.
Page 11
ANUAL