Programming Cable Converter (Or Dbs Receiver) Control; To Unlock The Cbl Key - Universal Electronics MILLENNIUM 4 User Manual

Millennium 4 Mnl M4094 rev
PROGRAMMING TV/VCR COMBO CONTROL
Setup Codes for TV/VCR Combos (continued):
Magnin 0240
Memorex 0037, 0162 (for TV use 0250)
Mitsubishi 0048 (for TV use 0093)
Orion 0002, 0294, 0479
Panasonic 0035 (for TV use 0051), 0162 (for TV use 0250)
Penney 0035 (for TV use 0051), 0240, 0162 (for TV use 0250)
Quasar 0035 (for TV use 0051), 0162 (for TV use 0250)
RCA 0060 (for TV use 0047), 0035 (for TV use 0051),
0048 (for TV use 0093)
Sansui 0000, 0479
Sanyo 0240
Sears 0000, 0037
Sharp 0048 (for TV use 0093)
Sony 0032 (for TV use 0000)
Symphonic 0000
Zenith 0000
PROGRAMMING CABLE CONVERTER
(OR DBS RECEIVER) CONTROL
The Millennium 4 is preprogrammed at the factory to
operate the cable converter given to you by your cable
company. However, if you have another brand or model
of cable converter or satellite receiver that you would like
to control, then you'll need to perform the following
instructions to unlock the cable key, enter in a new code,
and lock the cable key again.

To Unlock the CBL Key:

1. Turn on the Cable Converter or DBS Receiver.
On the Millennium 4, press CBL once. Press
2.
and hold SETUP until the LED blinks twice,
then release SETUP.
Enter 9 - 9 - 7. The LED will blink twice.
3.
4. Press CH- once. The LED will blink twice.
12/27/02 11:00 AM
18
Page 18