Tools And Materials Needed - USSC Hotblast 1321 Owner's Manual

CONGRATULATIONS!
You've purchased one of America's Finest Wood Burning Heaters. By
heating with wood and coal, you're helping CONSERVE AMERICA'S
ENERGY!
Wood is our Renewable Energy Resource. Please do your part to
preserve our wood supply. Plant at least one tree each year. Future
generations will thank you.
NOTE: YOUR UNIT MUST BE INSTALLED BY A QUALIFIED
FURNACE INSTALLER. IMPROPER INSTALLATION COULD
VOID YOUR WARRANTY!
NOTE: (See Page 5, First Paragraph)

Tools And Materials Needed

TOOLS
Pencil
6 Foot Folding Rule or Tape
Tin Snips
Drill, (Hand or Electric)
Drill bit, - 1/8" dia.
(For Sheet Metal Screws)
Screw Driver (Blade-Type)
Gloves
Sabre Saw
5/16" Nut Driver or
5/16" Socket w/Ratchet
Safety Glasses
MATERIALS
6" Pipe, 6" Elbow, Collar and Thimble
as required (24 gauge min.)
1/2" Sheet Metal Screws
6" Inside diameter Listed Residential Type
or Building Heating Appliance Chimney
or existing masonry chimney (See Page 8)
Electrical Wiring
6" Draft Regulator
1/2" Conduit (Conduit Connectors)
Furnace Cement
Manufacturer Recommends:
Rutland Black-Code 78 or Equivalent
Plenum and Duct work as required.
2