Advertisement
JAY ®
WARNING
The owner of this equipment is responsible for making
sure that it has been set up and adjusted by an
Authorized Dealer under the advice of a healthcare
professional. It may require periodic safety and
function checks or certain in-use adjustments that can
be performed by the owner, caregiver, or Authorized
Dealer if desired.
A. MAINTENANCE AND CLEANING
1. Proper maintenance and cleaning will improve
performance and extend the useful life of your
equipment.
2. Clean your equipment regularly. This will help you
find loose or worn parts and make your
equipment easier to use. You will need a mild
detergent solution and cleaning rags.
3. If discovered, have loose, worn, bent, or damaged
parts replaced before using the Syncra Back.
B. CRITICAL SAFETY CHECKS
1. Fasteners
Sunrise Medical recommends that all fasteners be
checked for wear, such as loose bolts or broken
components every 6 months. Loose fasteners
should be re-tightened according to the installation
instructions.
2. Replacing Components
Contact your Authorized Dealer immediately to
replace any components. Do not continue to use
the system after identifying loose or broken
components.
C. EASY CLEANING
1.
Back Cover
a.
Remove the cover from back shell by
detaching the Velcro and the snaps. Unzip
the bottom of the cover.
Remove the foam and turn the cover
b.
inside out.
c. Zip the cover closed to avoid snagging.
d. Machine was in warm water 50
o
(122
F).
e. Drip and tumble dry on low heat.
o
C,
7
IV. USE AND MAINTENANCE
WARNING
The owner of this equipment is responsible for making
sure that it has been set up and adjusted by an
Authorized Dealer under the advice of a healthcare
professional. The Syncra Back and hardware may
require periodic safety and function checks.
Adjustments should be performed by your Authorized
Dealer. Always use parts and/or accessories that have
been recommended or approved by Sunrise Medical.
The Syncra Back is designed to be compatible with the
Q500 and Q700 SEDEO PRO power chair. Use with
another wheelchairs may cause harm to the equipment
and/or the user.
WARNING
Ensure that all hardware has been properly tightened
according to suggested specifications.
a.
Make sure all screws are securely tightened
before use.
b.
Check that the Syncra Back is securely
attached to the SEDEO PRO frame monthly
by re-tightening all screws.
c.
Double check fit and comfort for the user
before putting the Syncra Back into use.
d.
Failure to follow this check out procedure
could result in injury and/or damage to
your Syncra Back and/or components.
SYNCRA Back
250480 Rev. A
Advertisement
