Advertisement
JAY ®
A. SPINE ALIGN POSITIONING
COMPONENTS (option)
Spine Align Positioning Components are designed to
provide intimately shaped support within an "off-the-
shelf" back. Depending on your market, Spine Align
components may be included with your back. Shown
below are some typical components that can be used
with your Syncra Back Spine Align system.
1.
Spine Align Positioning Components Installation
a.
Have the user remove pressure from the
Syncra Back by leaning or sliding partially
forward if possible.
b.
Undo lateral zippers on cover and peel
away from the Velcro, holding the cover
to reveal the shell of the Syncra Back.
c.
Place the positioning component(s) (A) on
the Velcro inside of the shell and
re-attach the foam and cover assembly.
Pull down, making certain that the top
seam is aligned with the top of the shell. If
seam does not line up, the bottom of the
cover may need to be loosened.
24 MONTH LIMITED WARRANTY
1.
Each Jay Syncra Back is carefully inspected and tested to provide peak
performance. Every Jay Syncra Back is guaranteed to be free from defects in materials and
workmanship for a period of 24 months from the date of purchase, provided normal use.
Should a defect in materials or workmanship occur within 24 months from the original date
of purchase, Sunrise Medical will, at its option, repair or replace it without charge. This
warranty does not apply to punctures, tears or burns, nor to the back's removable cover.
2.
Claims and repairs should be processed through the nearest authorized supplier.
Except for express warranties made herein, all other warranties, including implied warranties
of merchantability and warranties of fitness for a particular purpose are excluded. There are
not warranties which extend beyond the description on the face hereof. Remedies for breach
of express warranties herein are limited to repair or replacement of the goods. In no event
shall damages for breach of any warranty include any consequential damages or exceed the
cost of non-conforming goods sold.
d. Have the user test the current Spine Align setup
for comfort and support and repeat steps a-c
until adjustment is complete.
e. Multiple configurations and combinations of
Spine Align components can be used. If
additional shapes or sizes are required, please
contact your dealer or Sunrise Medical at
(800) 333-4000.
f.
Spine Align components may be placed inside
the cover, behind the foam, if desired.
11
SYNCRA Back
VI. ACCESSORIES
VII. WARRANTY
250480 Rev. A
Advertisement
