Table of Contents
Advertisement
Troubleshooting
Problems with System Phones
System Phone Does Not Ring
Possible Cause 1: Ringer volume is set too low.
What to do: Press the volume control button while the phone is idle and the
handset is in the cradle.
If the phone rings increasingly louder, the problem is solved.
If the phone still does not ring, go to Possible Cause 2.
Possible Cause 2: The Do Not Disturb or Call Forwarding feature is turned on.
What to do: Check to see if Do Not Disturb or Call Forwarding is turned on.
If Do Not Disturb or Call Forwarding is turned on, turn it off.
If Do Not Disturb or Call Forwarding is not turned on, go to Possible Cause
3.
Possible Cause 3: Line Ringing is programmed for No Ring or Delayed Ring.
What to do: Check the Line Ringing setting for the extension.
If Line Ringing is set for No Ring or Delayed Ring, change the setting if
appropriate.
If Line Ringing is set for Immediate Ring and this phone is part of a
combination extension, see ''Problems with Combination Extensions''
on page 6-21.
If Line Ringing is set for Immediate Ring and the phone is on an extension
by itself, go to Possible Cause 4.
Possible Cause 4: Phone is faulty.
What to do: Unplug the cord from the base of the problem phone. Then plug the
cord into a phone that you know rings properly.
If the replacement phone rings properly, the problem phone is defective.
Call the hotline to arrange for a replacement.
If the replacement phone does not ring properly, call the hotline.
6-10
Advertisement
Table of Contents
