Table of Contents
Advertisement
Microphone
1
2
1.
PRESS- TO-TALK Button
Use the PRESS- TO-TALK button on the microphone to receive and transmit.
Press the button to activate the transmitter and release the button to receive.
When transmitting, hold the microphone about two inches from your mouth and
speak clearly in a normal voice.
2.
TONE CALL CONTROL (CALL) Button
Use the TONE CALL CONTROL (Call) button to check, edit, or transmit the TX
Selcalll D. Press the button once and the Selcalll D will be displayed. Under this
condition
you can change the Selcall ID (See page 16 for TX SELCALL
ID
Programming).
To abort, momentarily
press the Call button again. If you want
to transmit the existing code, press and hold the Call button for more than 1.5
seconds.
Page 4
Advertisement
Table of Contents
