Uniden SUNDOWNER UH-099 Owner's Manual page 19

TX SELCALL ID Format
To call
Transmitter SELCALL ID
10 radios
100 radios
1000 radios
10000 radios
[xl [xl [xl [xl [AJ
[xl [xl [xl [AJ [AJ
[xl [xl [AJ [AJ [AJ
[xl [AJ [AJ [AJ [AJ
where: [xl is a common SELCALL ID prefix of your group and,
[AJ is the CCIR Assigned Group Tone Code
example:
If one group comprises 10 members with SELCALL IDs.
ranging from
[1 J [2J [3J [4J [0],
[1J [2J [3J [4J [1],
[1 J [2J [3J [4J [2],
[1 J [2J [3J [4J [3J,
to
[1J [2J [3] [4J [9],
All in T.SQ mode at CH20.
If someone transmits [1J [2J [3J [4J [AJ on CH20, all of the above units will open
their Tone Squelched Receiver.
Group Calls and ordinary SELCALLs can be differentiated in the following
manner.
Group Call - Low tone beeps
Ordinary Selcall
-
High tone beeps
Note:
Acknowledge tones will not be received when a Group Call code is transmit-
ted. If all radios respond, acknowledge tones would only "litter" the channel
with crisscrossing signals.
To use the Group CalJing Feature effectively, your RX SELCALL ID should be
well arranged and assigned.
Page 18