Recovering Back To Default Configuration - Planet EMQ-SGS-5240 Series Quick Installation Manual

6. Recovering Back to Default Configuration
To reset the IP address to the default VLAN 1 interface IP address
"192.168.0.100", default Management Port IP address "192.168.1.1" or reset
the login password to default value, press the hardware-based reset button on
the rear panel for about 10 seconds. After the device is rebooted, you can log
in the management Web interface within the same subnet of 192.168.0.xx or
192.168.1.xx.
26
Figure 6-1: SGS-5240-24T4X/SGS-5240-24P4X Reset Button
22 23
Figure 6-2: SGS-5240-20S4C4XR Reset Button
14
27/Stacking Up 28/Stacking Down
26 28
25 27
MGMT
SYS
PWR
25 26
24
MGMT
Console, 115200
SYS
Reset
PWR
Reset Button
Reset Button
Console, 115200
Reset
27/Stacking Up 28/Stacking Down