4.1 Logging on to the Console
Once the terminal is connected to the device, power on the Managed Switch, and
the terminal will display "running testing procedures".
Then, the following message asks for the login user name and password. The
factory default user name and password are as follows as the login screen in
Figure 4-3 appears.
Username: admin
Password: admin
Figure 4-3: Managed Switch Console Login Screen
The user can now enter commands to manage the Managed Switch. For a detailed
description of the commands, please refer to the following chapters.
1. F or security reason, please change and memorize the new
password after this first setup.
2. O nly accept command in lowercase letter under console interface.
Note
7