Configuring Ip Address - Planet EMQ-SGS-5240 Series Quick Installation Manual

4.2 Configuring IP Address
The IP address configuration commands for VLAN1 interface are listed below.
Before using in-band management, the Managed Switch must be configured with
an IP address by out-of-band management (i.e. console mode). The configuration
commands are as follows:
Switch# config terminal
Switch (config)# interface vlan 1
Switch(config-if)# ip address 192.168.0.254 255.255.255.0
The previous command would apply the following settings for the Managed Switch.
IPv4 Address: 192.168.0.254
Subnet Mask: 255.255.255.0
8
Figure 4-4: Configuring IPv4 Address Screen